PRODUCTS RANGE
High Quality. Superior Performance.
Coal Based Powdered Activated Carbon
MICBLAC™
When the plant is consuming powdered carbon in tonnes per month wastewater colour removal, ACI mercury capture, large-scale industrial decolourisation the conversation comes back to value per unit of adsorption capacity. MICBLAC™ is our answer to that conversation.
ISO 9001:2015 · Kosher · Halal · HACCP
Why coal PAC is the workhorse of industrial dosing.
Produced by steam activation of high-quality coal under stringent process conditions, MICBLAC™ has a balanced meso/macro pore structure that works across both liquid and gas-phase applications. This is not a single-purpose carbon the same product family that handles municipal wastewater COD reduction handles ACI mercury injection in power plant flue gas systems.
High methylene blue values of 180–250 mg/g reflect exceptional capacity for large-molecule colour removal dyes, phenols, complex industrial organics that micropore-dominant carbons cannot reach at equivalent dose rates. Three grades give your procurement team the ability to match specification to performance requirement precisely: Grade 900 for standard wastewater applications, Grade 1000 for higher-demand industrial colour removal, Grade 1100 for the most demanding large-molecule adsorption targets.
It is the standard specification for large municipal wastewater treatment across India and our export markets. And for ACI mercury capture in coal-fired power generation and waste incineration, it is the accepted technical standard.
High-Grade Coal
Balanced Meso/Macro
180–250 mg/g
900 · 1000 · 1100 mg/g
What sets MICBLAC™ apart ?
01.
Balanced Meso/Macro Pore Structure
Liquid-phase dosing · Gas-phase ACI injection · Both from one grade family
04.
ACI Mercury Removal Standard
ACI standard · Mercury capture · Dioxin/furan compliance
02.
Iodine Number up to 1100 mg/g
Grade 900 · Grade 1000 · Grade 1100 — ASTM D4607
05.
90% Passing 200 Mesh
90% passing 200 mesh — ASTM D2862
03.
High Methylene Blue 180–250 mg/g
180–250 mg/g — the key parameter for colour removal applications
06.
Kosher, Halal & HACCP Certified
ISO 9001:2015 · Kosher · Halal · HACCP
Full parameter table
MICBLAC™.
Standard grades shown below.Specify Grade 900, 1000, or 1100 on order.
Washed and unwashed grades available. Custom mesh sizes on request.
| Iodine Number | M900: 900 mg/g · M1000: 1000 mg/g · M1100: 1100 mg/g | ASTM D4607 |
| Methylene Blue | 200–280 mg/g | — |
| Surface Area (BET) | 1,000–1,600 m²/g | BET |
| Total Pore Volume | 0.90–1.40 cm³/g | — |
| Moisture Content | < 3% | ASTM D2867 |
| Ash Content | ≤ 5% | ASTM D2866 |
| Bulk Density | 360–450 kg/m³ | ASTM D1895 |
| pH Value | 9–11 | ASTM D3838 |
| Mesh Size | 90% passing 200 mesh | ASTM D2862 |
| Certification | ISO 9001:2015 · Kosher · Halal · HACCP | — |
Where MICBLAC™ is specified.
Specified in applications where large-molecule adsorption capacity, cost efficiency at scale,
and dual liquid/gas-phase performance define the grade requirement.
Wastewater Treatment
Municipal Wastewater Dosing
Slurry dosing for COD reduction, colour removal, pharmaceutical micro-pollutants, and trace organics in municipal STP operations. Standard specification for large treatment plants consuming tonnes per month.
Power Generation
Mercury Removal — Flue Gas (ACI)
Injected activated carbon for mercury capture and dioxin/furan removal in coal-fired power stations and waste-to-energy plants. Accepted ACI standard for regulatory compliance.
Drinking Water
Emergency Water Dosing
Rapid deployment for taste, odour, pesticide, or algal toxin events in drinking water treatment plants. Dosable within hours — no infrastructure change required.
Industrial Effluent
Industrial Effluent Treatment
Chemical, textile, tannery, and pharmaceutical effluent COD and colour reduction before biological treatment or discharge to receiving water.
Food & Beverage
Sugar & Starch Decolourisation
High methylene blue coal PAC for colour removal in sugar refining and starch processing where MICWOOD™ performance is not required and cost efficiency drives the specification.
Pharmaceutical
Pharmaceutical Wastewater
Removal of pharmaceutical residues, API traces, and organic colour from manufacturing effluent before environmental discharge.
Request a free sample of
MICBLAC™
Dispatched within 5 working days with full CoA and SDS. No commitment, no minimum order required.
Our technical team follows up on your test results at no additional cost.